Caring for your Opti-Coat ceramic coating is simple and ensures it continues to provide maximum protection and a brilliant shine for years to come. By following a few key maintenance practices with the Opti-Coat Maintenance product line, you can keep your vehicle looking its best.
The Do's and Don'ts of Opti-Coat Care
DO:
Wash your vehicle regularly—at least once every 1-2 weeks.
Use a high-quality car wash soap designed for coated vehicles, like Opti-Coat No Rinse Wash & Shine or Opti-Coat Car Wash.
Use the two-bucket method to prevent scratches: one bucket for your wash solution and one bucket with clean water to rinse your wash mitt.
Use a microfiber wash mitt.
Dry the vehicle with a clean, plush microfiber drying towel.
DON'T:
Don't use automated car washes with stiff brushes, as these can create swirls and scratches. Touchless car washes are generally safe, but hand washing is always recommended for the best results.
Don't use harsh degreasers, wheel cleaners, or any acidic or solvent-based cleaners on your coated surfaces.
Don't use abrasive polishes or waxes, as they are not needed and can degrade the coating's performance.
Step-by-Step Maintenance Guide
Step 1: The Initial Wash (First 7 days)
For the first week after your coating is applied, avoid washing your car if possible to allow the coating to fully cure.
If you must wash it, use a gentle soap like Opti-Coat No Rinse Wash & Shine and avoid excessive scrubbing.
Step 2: Regular Washing with Opti-Coat No Rinse Wash & Shine
This is the recommended method for most washes, as it's safe, effective, and conserves water.
Preparation: Fill a bucket with 2 gallons of water and add 1 ounce of Opti-Coat No Rinse Wash & Shine.
Wash: Dip a clean microfiber wash mitt into the solution. Wash one section of the vehicle at a time, moving from top to bottom.
Rinse & Dry: There's no need to rinse with a hose! Simply dry the section you just washed with a clean microfiber towel before moving on to the next section. The solution is designed to encapsulate dirt particles, allowing them to be safely wiped away without scratching.
Step 3: Enhancing Protection & Gloss with Opti-Seal or Opti-Coat Hyper Seal
Opti-Seal and Opti-Coat Hyper Seal are advanced sealants that can be applied to the surface of your ceramic coating to boost its water repellency, gloss, and slickness. They are not waxes and are designed to bond with the ceramic coating.
Wash the vehicle thoroughly using Opti-Coat Car Wash or Opti-Coat No Rinse.
Ensure the surface is clean and dry.
Application:
Opti-Seal: Mist a small amount onto a clean microfiber applicator pad and wipe it evenly over one panel at a time. No need to buff or wipe off, just let it dry for a few minutes.
Opti-Coat Hyper Seal: Mist a fine layer directly onto a clean panel. Use a fresh microfiber towel to spread the product evenly and then use a second, clean microfiber towel to lightly buff the surface to a high gloss.
Frequency: Applying Opti-Seal or Opti-Coat Hyper Seal every few months will keep your coating performing at its peak.
By following these simple steps, you can ensure your Opti-Coat ceramic coating provides long-lasting protection, making your vehicle easier to clean and keeping it looking freshly detailed.